My interest in robotics was always present, but until a certain age it was a complete unachievable skill due to my artistic and non engineering background. When I discovered the Arduino platform I started to mess with LEDs, buttons, breadboards, sensors and motors, and when suddenly I gathered everything into one piece my first robot was born. After that many robots and strange creatures appeared. Most of all, the main objective was to have loads of FUN!! I never imagined that this hobby would become a business someday!
With a better understanding of robot building and navigation programming I came up with this robot!
I think that the great improvement here was that I’ve made a plan of what I wanted to build and looked after solutions before the assemble process. So, this one came out a more successful robot!!
This is my first real approach of avoiding obstacles and navigation programming and I’ve had a lot of fun with it! Nevertheless, the values that return from the sensor fluctuate a little and I need to work on it!
Here goes my second robot. This turns out to be the 4th robot actually :)
I found this offroad car in an old junk and it was love at first sight!
Now I want to add some brains and sensors and give him a new life :]
The steering DCmotor burned out and I’ve removed all the gears and stuff around it. I’ve made a hole and installed a servo motor to do the steering, it seems to work out good! I can´t post a video because the motor shield I was using burned out as well, now I’m working on a custom motor driver … (it seems I’m having lots of burning issues lately) :D
2008 – 09 – 22 —- update ———————————
My custom motor controller seems to work quite well! These videos show the servo steering.
I´m so proud of my little Baratinha!! :] Thanks to João Silva for putting me up-to-date!
I thought this was a finished project… I was wrong!! :]
I’ve decided to change the structure and the geometry of the chassis. Now the gravity center is lower, which performs more stability. I’ve decided to remove the other power switches and put these smaller ones, one below the other, so that I can switch on all the system at once. And now about the ultrasonic sensor :)
I’m programming the navigation system, and it’s being another challenge for me! But I’m having lots of fun with it!!
I’ll be out for one week so see you soon guys! ;)
Just a final note: I thought that if I created a blog post and assigned it to my robot project it would appear in this page.. but it didn’t.. so, I’ll update only this page from now on..
I´m closing this project because the motor that I’m using is very weak and it doesn’t have enough strength to run with all that stuff. I’ll make a similar one with a stronger motor and bigger wheels, and with a better understanding of robot design!
It was a good way to start and I’ve learned a lot about hand crafts, physical construction, materials and programming. :)
I started this robot without any planning at all, I was just adding more and more stuff, and when a problem was solved, another problem was created, so this resulted very time consuming. It was something like adding something here and something there, then I didn´t liked it there so changed it… Now I must fix this because I’m thinking about a new way of doing it… so it was like a never ending project :)
The main purpose here was to build something, to understand how work some materials, like hot glue, and to program an interaction system.
The main purpose here was to build something, understand how some materials work like hot glue, and program an interaction system.