Guilherme Martins

ICU is a sub-project of the SWARS (see what a robot sees) project.

This time I not just wanted to see what a robot sees, but I also wanted to give the robot the ability to understand that there is a person in the room, and stare at the person.

To detect faces I used the OPENCV library for Processing, wich turns out to be very fun to work with and is very sensitive to human faces.. and sometimes it detect faces where there aren’t any.. maybe it is a ghost face detector algorythm!!

I didn’t have time to work with the four motors, I am only working with the two servo motors on the top. Next step will be to apply inverse kinematics and have a better level of interactivity.

Unfortunately I had to pick the computer that was being used in this installation, I will need it in the next weeks, but this bot will be available to the public very soon I promise!!

This is the code I am using if someone wants to look at it, you will need to have the MegaServo library installed for the Arduino sketch, and the OPENCV lib for the Processing sketch.